Відео

How to turn them off completely? There is no switch to cut the power..

Thank you for the demo

How long is the uk power cable

No explica cuanto tiempo puede seguir grabando después que se va la electricidad o si no graba más después después que se interrumpe el fluido eléctrico, quisiera saber, gracias por compartir 👍.

what is the highest core can i replace to celeron?

Saya mau kalau di kasih😊

2000 GBP for all that! Wow. over $7000 CAD today. (Board, Audio Rack, Flight case)

I bought one last week and it works fine😊

thank you thats was helpful

I found one of these in a skip and I’ll be honest I had no idea what it was and it doesn’t turn on so yeah I did find the video helpful and does anybody have any idea how it works and how do use it I reckon it’s been out of order a couple months because of the testing sticker on it

Every time is starts and stops it does a click sound. Is that normal?

Thanks a million! This just helped me a bunch!

Thank you - just got mine - this was very helpful. Thanks

That worked? I often wondered if I'd need a whole new board due to support chips? I guess if the OEM had various options, you could just upgrade the cpu later, way cool? I've got a nice machine buy w/Celeron, I'd like to go to at least i5, expected I'd need to swap moboard...

Turn it around bruh

Interesting you replaced a 2hole fan with a 4hole fan, and it worked perfectly?

Hi Nathan. I've had a pair of these mini LED moving head lights for many years, set as master-slave on sound activation (Srun). Having just seen your very interesting video I've now adjusted them differently (added rPan & rTil). Though I really want to adjust or modify the sensitivity so the music doesn't need to be as loud. I've added another amplifier wired to a pair of speakers in the roof cavity immediately above the master unit. Whilst I can clearly hear them inside the house through the Gyprock ceiling, the lights still don't trigger, even with the volume turned to max. I'm now thinking of experimenting with placing a speaker directly on top of the master, or cutting a vent hole through the ceiling, or possibly even rebating the base of the unit into the ceiling... Is there a way to make more sensitive? And do you know where the microphone is? (as I could relocate it into the ceiling by the speakers). I thought an advantage of a second amp would be that regardless of music volume (in the house), the lights would effectively have their own sensitivity via the second amp (as it gets it signal from the preamp RCA connection) Thanks, Brad

Its older and modern laptops don't have this anymore

Great tutorial, I'd just advise against force shutting down your computer by holding down power button during the boot phase. To avoid potential data corruption, better wait for it to boot up and do a regular soft restart or shutdown.

🤔

Just beware all that bumping up the current too much can greatly decrease the life of an already weak laser.

How the coolant respond to the new cpu? Manage to cool enough?

New Northbridge (if you are a collector) or trashcan.

Hi I recently got a emergency work light with tubes like urs.. Could i change it to LEDS but with the originsl selector switches etc? Where could i or should i join the leds as i read that flouresent n leds are both different workings. Any reply will be greatly appreciated sir

is there anyone that has a video about how to set one of these up? cant find any definitive answers to the issues im having online.

Awesome job! I appreciate that you went through it totally from start to finish instead of others doing you start here then 30 seconds later it's all apart. I got 4 of these speakers and only tested 3 but all have tweeter problems. Break out the meter and hope that's all with them. Well, out of the 4, 2 of them had the tweeter missing entirely and the other two did fail on the meter. I got them out easy enough. One trick I used this morning was with the black gunk on the screws, I hit them with a hot air gun for about 5 seconds at 200 degrees and pushed the phillips screwdriver in and came right out with no need for scraping. Once the screw is out, you can keep hitting it with the hot air gun and it'll curl right up and easy to come off.

I've a similar drive that seems to think its closed all the time. The tray opens and the belt is tight but it refuses to close.

i delidded my 4790k with the vice method. good times nice job on getting this boy running properly!

You do what and press what to make the display read what? Hard to see what you are doing with your camera sitting across the room. Get a zoom lens or move the camera close so dummies like me can see what buttons you press and what display screen reads.

Many thanks for this. Just fixed a Yamaha CD-S300 with this very issue.

I don't have internet in my deco net.

My hdfx100 head is making a vibration type noise that gets worse when you tap on the top im thinking something is just loose like a ground or something ? What do you think 🤔 cheers 🍻

my Copland CDA 288 laser is not reading the disc...your video shows only only 1 screw adjustment...in that same place mine has 3 and I don't see any screw adjustments unless the are resest a little more...what one do i try to adjust and are the to be screws inside those holes for me to adjust❓

this may come in handy...someone is shipping me a Copland cd player and he wasn't going to ship because he was afraid the laser might come out of alignment… and this video i might be needed...👍🏼

Worked a treat! Thank you. You get a sub

I personally would've wore gloves but great video

Sorry but this is not an alignment. All this does is turns up the factory calibrated voltage on the laser. Which greatly shortens the life it has left.

Be very careful when because there is still power to the unit even when it is turned off.

Can you say fit a tweeter that is for a RCF art 912 if they are known to blow in the ts312

Nice buddy ☺️

Are virus make Xbox shutdown with massage ventilaton error?

What’s your thoughts on these plz. Can you give a review or at least give a review in the comments. I have a chance to get them but can’t find any reviews. I don’t want to waste money

Much appreciated, lot learned. Definitely subscribing.

Would be very nice to upgrade it to lithium battery's I reckon you would probably get a lot more capacity out of them

I never understood why the P5Q has heatsinks on both vrm segments as standard same as the p5q deluxe, but the P5Q pro only has one segment of vrms covered. It's obvious the holes to put another heatsink on the board exist yet none of them has one. Penny pinching?!?.

Thanks for the video. I learned a lot. I have this same system. I'm having trouble that my playback is the wrong aspect ratio. It's stretched. Is there a way to fix that?

Turning up the laser power is just a temporary fix. It will stop working very soon.

Bravissimo. Ma quanto durerà??

if yu brake the pcb can if be repaired mine has all 8 pins broke

In my case it was the metal contacts in the plastic piece that were too compressed, so my solution was to take 6 match sticks and sharpen their ends to make a small wedge and then put in the plastic piece and break any excess length. The goal was to make sure both the pins on the mainboard and the contacts in the power supply made good contact.